Site Armor ArmorLay
Woven Stabilization Fabric
Stop mother nature from shifting the ground beneath with IKE’S SITE ARMOR ArmorLay, a heavy-duty, woven stabilization fabric that’s designed to provide superior erosion control by adding reinforcement strength to the surface, allowing for better load distribution. Professional grade with a needle-punch weave, it helps prevent surface ruts and potholes while adding stability when used as a separation fabric between rock and soil—giving you the upper hand against nature’s most unpredictable impulses.
DESIGNED FOR
Driveways, patios, construction entrances & more
SIZES AVAILABLE
6′ x 300′, 12.5′ x 30′, 12.5′ x 60
Product Specifications
Properties |
Standard |
Unit |
Measurement |
| Grab Tensile | ASTM D 4632 | lb | 200 |
Properties |
Standard |
Unit |
Measurement |
| Grab Elongation | ASTM D 4632 | % | 15 |
Properties |
Standard |
Unit |
Measurement |
| Trapezoidal Tear | ASTM D 4533 | lb | 75 |
Properties |
Standard |
Unit |
Measurement |
| Opening Size (Max AR V) | ASTM D 4751 | mm (US) | 0.43 (40) |
Properties |
Standard |
Unit |
Measurement |
| Permittivity | ASTM D 4491 | sec-1 | 0.05 |
Properties |
Standard |
Unit |
Measurement |
| CBR Puncture Strength | ASTM D 6241 | lbs | 700 |
Properties |
Standard |
Unit |
Measurement |
| UV Stability (@500 hrs) | ASTM D 4355 | % | 70 |
Properties |
Unit |
Measurement |
|
| Roll Width | ft | 6', 12.5' |
Properties |
Unit |
Measurement |
|
| Roll Area | yd2 | 600 |
Installation Instructions
- Mark the area to have ArmorLay Stabilization Fabric installed.
- Remove all grass and other organic material as well as any loose soil.
- Install ArmorLay directly on clean substrate. If a seam is needed, overlap 6" and use Weed Armor Landscape Pins ever 3–6' to secure into place.
- Install rock and compact if desired.
