Site Armor ArmorFilter
Non-Woven Filter Fabric
Designed to provide superior permeability without compromising on stabilization, IKE’S SITE ARMOR ArmorFilter is a non-woven filter fabric that allows water to filter through at a high flow rate to help prevent pooling and ponding. This professional-grade fabric aids in the water filtration process by allowing water to pass through while keeping soil and sediment out—stopping spring showers and summer storms from washing out hours and hours of hard work.
DESIGNED FOR
French drains, retention ponds & stabilizing non-paved driveways
SIZES AVAILABLE
12.5′ x 60′
Product Specifications
Properties |
Standard |
Unit |
Measurement |
| Weight (Typical) | ASTM D 5261 | oz/yd2 | 4 |
Properties |
Standard |
Unit |
Measurement |
| Grab Tensile | ASTM D 4632 | lb | 100 |
Properties |
Standard |
Unit |
Measurement |
| Grab Elongation | ASTM D 4632 | lb | 50 |
Properties |
Standard |
Unit |
Measurement |
| Trapezoidal Tear | ASTM D 4533 | lb | 50 |
Properties |
Standard |
Unit |
Measurement |
| Water Flow | ASTM D 4491 | gpm/ft2 | 140 |
Properties |
Standard |
Unit |
Measurement |
| Permittivity | ASTM D 4491 | sec-1 | 2 |
Properties |
Standard |
Unit |
Measurement |
| CBR Puncture Strength | ASTM D 4833 | lbs | 65 |
Properties |
Standard |
Unit |
Measurement |
| UV Stability (@500 hrs) | ASTM D 4355 | % | 70 |
Installation Instructions
- Remove any loose soil from area.
- Install ArmorFilter fabric flush with the soil. If in a trench or basin, allow extra material on edges.
- Install rock base.
- Install drainage pipe if applicable.
- Fill area to desired height with rock.
